Coremo
We are the official distributor of the Coremo company in Ukraine and are ready to offer the entire range of manufactured products.
Coremo Ocmea is one of the world's leading developers and manufacturers of disc brake calipers with more than 50 years of experience in the development of industrial brakes. Products include hydraulic, air, spring and electric brakes. Coremo also manufactures clutches and discs.
Coremo focuses on the reliability, safety and durability of its products.
Pneumatic and manual brakes with a caliper
Type of brake: pincer.
Brake disc diameter: from 250mm to 1065mm.
Braking force: from 148N to 39800N.
Braking torque: from 6Nm to 20000Nm.
Thermal power: from 0.2 kW to 20 kW.
Operating temperature: from -20 ° C to +50 ° C.
Air caliper brakes are designed for those industrial applications where air pressure is used to control the braking system. The principle of the lever mechanism provides a simple but very effective control. This family includes brakes with both pneumatic and spring actuation.
A wide range of models with manual or pneumatic actuation and reverse (spring actuated) emergency brakes. Braking force from 150 to 40,000 N. On all models: a device for compensating the wear of brake linings, a cylinder balancing system for installing the brake in any position, automatic alignment of the pads. Additionally: brake pad wear indicator, on/off indicator. Cast iron wheels are always in stock.
It is most often used in cable production equipment, various winding devices, quarry excavators, paper machines, etc.
Hydraulic brakes
Type of brake: pincer.
Braking force: from 6.7 to 270 kN.
Braking torque: from 200 to 127,000 Nm.
Operating temperature: from -45 ° C to +170 ° C.
Coremo hydraulic brakes are designed to provide simple and quick solutions to safety challenges in a wide range of industrial applications. Available in lever or direct actuation, oil or spring actuation, these brakes are designed to allow multiple configurations and maximum adaptability.
Brake solutions for extreme operating conditions
Available on all brakes:
Management systems that optimize its safety and efficiency.
ON/OFF state sensors (mechanical or inductive).
Pad wear indicators.
Friction linings that have passed dynamic and static tests.
Standard hydraulic brakes are designed for indoor operation at operating temperatures from -10°C to +100°C. Special solutions can be offered for operation outdoors or in extreme conditions (low temperatures, corrosive shelf environments).
Small pneumatic brakes and clutches
Type of brake: pincer.
Braking force: from 450N to 3630N.
Braking torque: from 112Nm to 970Nm.
Thermal power: from 0.6 kW to 3.9 kW.
Operating temperature: from -20 ° C to +50 ° C.
SB&TB brakes are combined pneumatic braking devices that provide an efficient and adjustable system over time. Available in both positive and negative versions for safety systems, these brakes are highly versatile and easy to assemble and maintain.
Very compact brake systems.
Their design, as well as the reliability of production, are characterized by special care. At the customer's request, these brakes can be customized with options such as special patterns, different friction materials, wear indicators, dual pads and other features to make the brake suitable for any specific application.
Modular brakes with increased ventilation
Brake type: mounted on the shaft.
Dynamic moment: from 112Nm to 1440Nm.
Maximum speed of rotation: 2670 rpm.
Operating temperature: from -20 ° C to +50 ° C.
Modulo brakes: high ventilation, high heat dissipation and Kevlar pads.
(These brakes are especially suitable for unwinding and winding at a maximum speed of 2,670 rpm.
Fans for dissipation of power 4.5 kW.
Protective casing that meets modern safety standards.
Modular and ergonomic design that facilitates configuration change and maintenance.)
Download
catalog
Multi-disc brakes and clutches with an air chamber Air Tube Design clutches and brakes
Brake type: mounted on the shaft.
Maximum rotation speed: from 750 rpm to 4000 rpm.
Braking torque: from 210Nm to 49500Nm.
Operating temperature: from -20 ° C to +50 ° C.
Low-inertia pneumatic brakes and gear clutches. A spring version is possible to meet the requirements of increased security. The design of the pneumatic chamber provides high controllability and versatility for many industrial high-frequency processes. The multi-disc system gives the highest torque values with compact dimensions.
Download
catalog
Disc brakes with air cooling
Brake type: mounted on the shaft.
Braking torque: from 15Nm to 1120Nm.
Heat capacity: up to 16 kW.
Maximum speed of rotation: 3000 rpm.
Operating temperature: from -20 ° C to +50 ° C.
Dual ventilated brakes. Double ventilated disk and a special membrane sensitive to the smallest pressure changes.
Diaphragm pneumatic brake used for tension control. Disc grinding serves to improve heat dissipation. The special membrane that sets the brake in motion is very sensitive to minimal pressure changes and is resistant to high temperatures.
Download
catalog
Brakes and clutches with water cooling
Brake type: multi-disc.
Dynamic moment: from 100Nm to 51000Nm.
Maximum speed of rotation: 3450 rpm.
Thermal power: from 2.8 kW to 273 kW.
Operating temperature: from -20 ° C to +50 ° C.
Water-cooled and high heat output brake and clutch: water cooling system + high heat output + multi-disc system + air tube design.
The W-R series pneumatic disc brakes are equipped with a liquid cooling system to increase thermal output. The sensitivity of the pneumatic system ensures the maximum quality of adjustment. They are available with steel W or copper R discs (to increase the thermal output to 273 kW). The main application is brake test stands.
Download
catalog
Hydraulic stations for the control of galfmas
Coremo hydraulic stations are designed to complete the brake system in all industrial installations where a hydraulic brake is used. To control all types of hydraulic brakes - oil, spring, caliper and direct - two different families have been developed: "P" for oil brakes and "N" for spring brakes.
Coremo Ocmea's technical department will select the power unit according to the number and type of brakes according to the specific needs of the customer, as well as provide recommendations on oil consumption and volume.
Each power unit is equipped with:
Double safety valve.
The oil temperature control system in the tank.
Manual control system for use in case of power failure.
A certificate for an explosive environment can be issued upon request.
This guarantees the creation of a safe, reliable braking system with compact dimensions and quick response.
Download
catalog
Ready to start
cooperation?
We will listen to your needs, determine the best approach, and then create a customized solution that is right for you.